Cable runs

Wires and cables in cable runs can be bundled in two ways: permanently, using single use cable ties made of plastic or metal, or with releasable ties made from metal, plastic or Velcro. Releasable ties will enable you to add more wires in the future, as the network expands. An additional advantage of Velcro ties is the gentle material they are made of - soft and flexible Velcro will not damage the insulation of light wires, e.g. UTP. Heavy energy wires can be bundled with releasable stainless steel ties or a ball lock tie.

Power supply and control cables are mounted onto cable trays using special ties, attached to the tray slots. The tensile strength of these ties is 55kg. If you need an even more secure solution, where the cable weight is greater or the cables are mounted in vertical routes, use stainless steel ties with a strong ball lock. These ties are made of acid-resistant AISI 316L stainless steel, resistant to fire, UV, salt and corrosion. Their minimum tensile strength is up to 1335N. In addition, they can be coated with a black or red polyester layer for circuit distinction. An external polyester layer and gently rounded edges protect the cable from damage.

Cable runs are often mounted under the ceiling to avoid taking up office or production space. Legible identification information, visible from a distance, can be permanently engraved onto multi-coloured laminate or printed on a self-adhesive foam backed label. Both solutions can be prepared on site, using a Partex printer. If you have no time or you do not have a Partex printer, you can trust our experience — order from us to suit your needs.